Guide · Permits & local rules
Roofing permits in St. George, Utah: what the rules are and who issues them
As of October 2026, a roof replacement in St. George, Utah is permitted work under the 2021 International Residential Code that Utah adopted statewide (Utah Code 15A-2-103, effective July 1, 2026): the code’s list of work exempt from a building permit contains no roof item, and Utah’s own amendments to that list don’t add one. Inside city limits the permit comes from the City of St. George Building Department (61 S Main St, 435-627-4100) through its CityInspect portal; outside any city it is Washington County Community Development (435-301-7250).
St. George Roof Cost · St. George, UT — sources read October 22, 2026. Confirm your specific project with the issuing office; this page explains the rules, it doesn’t issue permits.
Why a reroof is permitted work here
Utah does not leave building codes to each city. The Legislature adopts the State Construction Code in Utah Code 15A-2-103, and the version effective July 1, 2026 (amended by H.B. 65 in the 2026 session) names the 2021 International Residential Code for houses and townhomes and the 2024 International Building Code for other buildings. The City of St. George’s Building Department page says the same thing in fewer words: design criteria must follow the currently adopted codes “pursuant to Utah’s House Bill 65 Construction Code Amendments.”
The permit question is answered in the IRC’s first chapter. Section R105.1 says anyone who intends to “construct, enlarge, alter, repair, move, demolish or change the occupancy of a building” must first apply to the building official and obtain a permit. Section R105.2 then lists the work that is exempt — small detached sheds, fences not over 7 feet, short retaining walls, sidewalks and driveways, painting and similar finish work, shallow prefabricated pools, playground equipment, small window awnings, low decks. Utah’s statewide amendments in Utah Code 15A-3-202 edit that list — retaining walls, decks, and an added exemption for storage conex boxes — and nothing in either the model list or the Utah edits mentions roofing, reroofing, or roof coverings. A tear-off and replacement is an alteration or repair of the building with no exemption to point to, which is why it is permitted work.
That is also why the right answer to “we don’t need a permit for this” is to call the issuing office yourself. The code sets the rule; the local building official applies it to your roof.
Who issues the permit: city or county
Washington County is a patchwork of city limits, and the building office that covers your roof depends on which side of a line your lot sits on, not on your mailing address. Use the table, then confirm by phone.
| Where the roof is | Who issues the permit | Contact |
|---|---|---|
| St. George city limits | City of St. George Building Department | 61 S Main St, St. George — 435-627-4100. Permits are requested through the city’s CityInspect portal. |
| Washington City | Washington City Building Department | 111 North 100 East, Washington — (435) 656-6326. |
| Hurricane | Hurricane City Building Department | 147 N 870 W, Hurricane — 435-635-2811. |
| Ivins | Ivins City Building Department | (435) 634-9753. |
| Santa Clara | Santa Clara City Building Department | (435) 673-6712. |
| Unincorporated Washington County (Veyo, Central, Diamond Valley, Dammeron Valley, Gunlock, Apple Valley, Rockville, New Harmony) | Washington County Community Development | 111 East Tabernacle St., St. George — (435) 301-7250. The county accepts building-permit applications electronically only. |
La Verkin and Toquerville homeowners should contact their own city office; those two cities are in our service area but their building departments’ details are not reproduced here.
How the process works, step by step
- Confirm which building office covers your address. City limits and county lines are not obvious in Washington County. If your tax notice says St. George, it is the City of St. George Building Department (435-627-4100). Washington City, Hurricane, Ivins, and Santa Clara each run their own building office, and addresses outside any city go to Washington County Community Development (435-301-7250).
- Ask the contractor, in writing, who pulls the permit. The normal arrangement is that the roofing contractor applies for the permit under their own Utah DOPL license and the fee appears as a line in the bid. Get that in the written scope. A contractor who says a reroof needs no permit, or asks you to apply as the owner so their name stays off the record, has given you a reason to keep shopping.
- Have the scope ready before anyone applies. The application and the inspector will want to know the roof covering being installed, whether the existing layers are being torn off, the underlayment, and whether any decking is being replaced. These are the same items that belong in a complete bid, so a good bid doubles as the permit worksheet.
- Apply through the right channel. The City of St. George takes building-permit requests through its CityInspect portal; the county takes applications electronically only. Ask what the office’s current fee is — St. George publishes a Building Fee Sheet on the Building Department page — and whether a plan or site drawing is needed for a like-for-like reroof.
- Schedule the inspections the office requires and keep the record. Ask the issuing office which inspections apply to a reroof — many offices want to see the deck before it is covered, and a final once flashing, vents, and drip edge are on. When the final passes, keep the permit number and the inspection result with your contract and warranty paperwork; it is the document a future buyer or insurer will ask for.
What the inspector is checking: tear-off and re-cover rules
The IRC’s reroofing section (R908) is the part of the code that decides whether your old shingles come off. Utah’s statewide IRC amendments don’t touch it, so the model language is what a St. George inspector works from:
- Replacement means down to the deck. R908.3 defines a roof replacement as removing the existing layers of roof covering to the roof deck, with a narrow allowance for leaving an adhered ice barrier membrane in place and covering it with a new one.
- Re-cover is conditional. R908.3.1 does not allow a new covering over an old one where the existing roof is water-soaked or deteriorated enough that it isn’t an adequate base, where the existing covering is slate, clay, cement, or asbestos-cement tile, or where two or more layers are already on the roof. St. George’s concrete-tile housing stock makes the second condition a common one: tile is not an over-lay candidate.
- Separate systems are treated differently. The same section allows complete, self-supporting systems such as standing-seam metal designed to carry loads straight to the structure, certain metal and tile coverings over wood shake when installed per R908.4, and a new protective coating over an existing spray-foam roof without tear-off — the last one matters on flat sections, where a foam recoat is maintenance rather than replacement.
- Old parts don’t automatically come back. R908.5 lets sound slate, clay, or cement tile be reinstalled but not cracked or broken pieces, and requires rusted, damaged, or deteriorated flashings, edgings, vents, and outlets to be replaced rather than reused.
Read against a bid, these rules explain two common line items: the tear-off and disposal charges on a replacement, and the flashing replacement a careful contractor includes without being asked. In the itemized St. George quote on our replacement cost page, tear-off alone was $1,229 of a $10,871 total — a bid that omits it on a two-layer roof is not a lower price, it is a missing line.
Permit, license, and insurance paperwork are three different checks
A permit says the work will be inspected. It says nothing about who is doing it. Those are separate checks, and all three belong in your file:
- License. Utah’s Division of Professional Licensing (DOPL) licenses contractors, and its public lookup at secure.utah.gov shows status, expiration, classifications, and any disciplinary action. Check that the licensed name matches the name on the bid and on the permit application. The license verification guide walks through the lookup field by field.
- Insurance. Ask for current certificates of general liability and workers’ compensation naming the business, and call the agent listed on them. Permits don’t verify coverage.
- The insurance-claim rules, if a storm is paying. On insurance-funded roof work, Utah Code Title 13, Chapter 50 governs the contract, cancellation rights, and deductibles. The storm and insurance guide covers it; it has nothing to do with the permit, but it is often the same conversation.
What this page deliberately doesn’t tell you
A few things change by office and by job, and a guide that guesses at them does more harm than one that sends you to the source. The City of St. George’s permit fee comes from its published Building Fee Sheet, so ask the office or read the sheet rather than trusting a number on a contractor’s flyer. The exact inspection sequence for a reroof, the turnaround on an application, and whether a given small repair will be treated as exempt are all calls the issuing office makes. HOA architectural approval — common in St. George’s planned communities, especially for tile color and profile — is a private rule layered on top of the permit, and the HOA’s own documents are the only source for it.
Want a pro who pulls the permit for you?
Most reputable local roofers handle the permit as part of the job and show it as a line in the bid. If you would rather not start from a search page, request quotes below and we’ll connect you with an independent local roofing contractor who serves your address — then run the license lookup and the permit question past them yourself. For the numbers to compare bids against, the replacement cost guide and repair cost guide (nationally, repairs run $395 – $1,966 typical) are the place to start.
Sources, read October 22, 2026: Utah Code 15A-2-103 and 15A-3-202 (le.utah.gov); 2021 International Residential Code sections R105.1, R105.2, R908.3, R908.3.1, R908.4 and R908.5 as reproduced in municipal building-department handouts; City of St. George Building Department page (sgcityutah.gov); Washington County Community Development page (washco.utah.gov); city building-department contacts for Washington City, Hurricane, Ivins and Santa Clara as published by each city. Codes and office details change — confirm with the issuing office before relying on any of this for a specific project.
Free quotes
Get matched with a local roofer who handles the permit
Tell us what's going on with your roof and we'll connect you with an independent local contractor for a free, no-obligation quote.
Good to know
Frequently asked questions
Do I need a permit to replace my roof in St. George, Utah?
As of October 2026, replacing a roof in St. George falls under the building-permit rules of the 2021 International Residential Code that Utah adopted statewide, and neither the model code’s list of permit-exempt work nor Utah’s amendments to that list exempt roof work. The City of St. George Building Department (435-627-4100) issues permits inside city limits through its CityInspect portal; confirm your specific project with that office before work starts.
Who issues roofing permits in St. George — the city or Washington County?
Inside St. George city limits it is the City of St. George Building Department at 61 S Main St (435-627-4100). Washington County Community Development (435-301-7250) handles addresses outside any city, such as Veyo, Central, Dammeron Valley, and Apple Valley, and accepts applications electronically only. Washington City, Hurricane, Ivins, and Santa Clara each have their own building department.
Does a small roof repair need a permit in St. George?
The code language is broader than most people expect: the IRC’s permit section covers work to “alter” or “repair” a building, and its exemption list has no roof-repair item. In practice many offices treat a few replaced shingles differently from a tear-off, but St. George does not publish a repair threshold on its permit pages, so call the Building Department at 435-627-4100 and describe the job before deciding a repair is exempt.
How much does a roofing permit cost in St. George?
The City of St. George publishes its current fees in a Building Fee Sheet on the Building Department page, and the fee depends on the job, so we do not quote a city figure here. For scale, the itemized local replacement quote on our cost page carried a $450 permit-and-admin line on a $10,871 job — a contractor’s line item that bundles paperwork time, not the city’s fee by itself.
Who should pull the permit — me or the roofer?
The roofing contractor, under their own Utah DOPL license, is the normal and safer answer. The permit record then shows who did the work, which matters if a warranty or insurance claim comes up later. St. George does publish an owner-builder form, but a contractor asking you to pull the permit as the owner is asking you to put your name on their work.
Can a new roof go over my old shingles in St. George?
Only when the model code’s re-cover conditions are met — IRC R908.3.1 does not allow a re-cover where the existing roof is water-soaked or too deteriorated to serve as a base, where the existing covering is slate, clay, cement, or asbestos-cement tile, or where there are already two or more layers of roofing. Utah’s statewide IRC amendments do not change that section, and the inspector applies it to your roof, so plan on a tear-off if any of the three conditions is present.
What happens if a roof was replaced without a permit?
The practical consequences show up later: no inspection record for a buyer, insurer, or warranty dispute, and the possibility that the building office requires the work to be permitted and inspected after the fact. If you are buying a St. George home with a recent roof, ask for the permit number and the final-inspection result, and check it against the issuing office’s records.